Give your Tesla that Performance Package look with easy to install Caliper Covers.

These lightweight aluminum, powder coated caliper covers, were designed to attach to your Tesla calipers.

(Fitments available for 2012-2016 model years, 2017 Call for pricing)

(Note: Red is not multi-coat red)

Note: Before 2017 For 19″ wheels 4 caliper covers are included.  20″ and 21″ wheels come as a set of 6 caliper covers.

2017 Model S does not have parking brake calipers, so there would be 4 caliper covers provided regardless of wheel size. 2017> caliper covers can be special ordered by ForMyTesla.com

If you have aftermarket wheels installed, check to see if there is enough clearance to install the caliper covers, before ordering. There must be at least 1/8 inch or about 3mm clearance between the wheel spokes and your factory calipers. Measure from the back of the wheel to the front face of the factory caliper. If you can slide two stacked quarters between the brake caliper and the wheel, you will have enough clearance to install the caliper covers.

Installation Video and Directions:
http://calipercoversmgp.com/installation/

If you happen to have a floor lift..you can buy jack stands here:

JackPoint JackStands, LLC
630-430-8481
Video:
https://www.youtube.com/watch?v=bgsZmjkPCM0

 

Questions?
Email Jerry at:  info@ForMyTesla.com
or Call:  224 676 1484

 

Suggestion: While you are installing your caliper covers it would be a good time to use G2 epoxy paint to cover your rotor hat
and rotor edges to prevent rust and maintain a very clean look. G2 paint can be ordered on this site here:

http://formytesla.com/product/rotor-hat-silver-paint-kit/